Wound Product Guide

5
Yes
None
1
15
Search...
/wound-product-guide/
Thumbnail
Sort By:

Intention to Heal

Brand

24 products«1 of 2»
Acticoat 7
Acticoat 7 Image

smith and nephew

 

Product type – antimicrobial silver dressing.

Principle function Acticoat*7 (with Nanocrystalline Silver) dressing is an effective antimicrobial barrier dressing. The nanocrystalline coating of silver rapidly kills a broad spectrum of bacteria in as little as 30 minutes and is effective for up to 7 days. Acticoat 7 dressing consists of five layers:

two layers of an absorbent inner core sandwiched between three layers of silver coated, low adherent polyethylene net.

Nanocrystalline silver protects the wound site from bacterial contamination while the inner core helps maintain the moist environment optimal for wound healing.

Recommended useActicoat 7 has antimicrobial activity against a broad spectrum of wound pathogens including MRSA & Pseudomonas aeruginosa. It rapidly kills bacteria in as little as thirty minutes. It’s soft and highly flexible with stretch properties. Acticoat 7 also allows exudate transport through the dressing.

Frequency of dressing change – Acticoat*7 can stay intact for 7 days depending on the level of exudate. The dressing can be gently lifted to inspect the wound underneath. The dressing is a primary dressing and should be used in conjunction with a secondary dressing. The dressing should be changed once 75% saturated.

Precautions If patients having an MRI it is contraindicated.

Contraindications For external use only. Acticoat 7 is not compatible with oil-based products, such as petrolatum. Avoid contact with electrodes or conductive gels during electronic measurements e.g. EEG and ECG. Acticoat 7 may cause transient discolouration of the surrounding skin. Avoid exposure to temperatures above 50 degrees centigrade. Protect from light anddo not use if product colour is not uniform.

Manufacturer Smith and Nephew

Australian supplier –Smith and Nephew Australia

Ph: 13 13 60

Website: www.smithnephew.com/australia/healthcare

Available sizes

CODE

66000809

SIZE

5x5cm

ITEMS/Box

5

66000796 10×12.5cm 5
66000797 15x15cm 5

acticoat7

Acticoat Absorbent with SILCRYST
Acticoat Absorbent with SILCRYST Image

smith and nephewProduct type – A nanocrystalline silver dressing.

Principle function Acticoat*Absorbent with SILCRYST* nanocrystalsis an absorbent Type 1 alginate dressing incorporating nanocrystalline silver on both sides of the dressing to provide antimicrobial protection and absorbency.

Recommended use Acticoat* Absorbent with SILCRYST  is recommended for moderate to highly exudating wounds as a Contact Layer for decreasing bacterial load.

Frequency of dressing change – Acticoat*Absorbent with SILCRYST can stay intact for several days, depending on the level of exudate. The dressing can be gently lifted to inspect the wound underneath. The dressing should be changed once 75% saturated.

Precautions If patients having an MRI it is contraindicated.

Contraindications Do not use on patients with a known sensitivity to silver or alginates. Do not use on dry or non-exuding wounds

Manufacturer Smith and Nephew

Australian supplier –Smith and Nephew Australia

Ph: 13 13 60

Website: www.smith-nephew.com/australia/healthcare

Available sizes

CODE

 

66001760

SIZE & SHAPE

5cm x 5cm

ITEMS/Box

 

5

66000841 10×12.5cm 5
66000840 2cmx30cm 5

arcticcoatabsorbent

Acticoat Flex
Acticoat Flex Image

smith and nephewProduct type – Acticoat* Flex is an antimicrobial silver dressing.

Principle function Acticoat*Flex is an effective antimicrobial barrier dressing consisting of a single layer of knitted polyester and coated in nanocrystalline silver.

Recommended useActicoat Flex has antimicrobial activity against a broad spectrum of wound pathogens including MRSA & Pseudomonas aeruginosa. It rapidly kills bacteria in as little as thirty minutes. It’s soft and highly flexible with stretch properties. Acticoat Flex also allows exudate transport through the dressing.

Frequency of dressing change – Acticoat*Flex can stay intact for 3 or 7 days (Acticoat Flex 3 or Acticoat Flex 7), depending on the level of exudate. The dressing can be gently lifted to inspect the wound underneath. The dressing is a primary dressing and should be used in conjunction with a secondary dressing. The dressing should be changed once 75% saturated.

Precautions If patients having an MRI it is contraindicated.

Contraindications Acticoat Flex is not compatible with oil-based products, such as petrolatum. Avoid contact with electrodes or conductive gels during electronic measurements e.g. EEG and ECG. For external use only, for example do not apply the dressing to exposed organs. Acticoat Flex should only be used on premature infants (less than 37 weeks gestation) when the clinical benefit outweighs the potential risks. Acticoat Flex is not intended to provide sole treatment for infected wounds. Acticoat Flex maybe used on infected wounds which are being managed per local clinical protocol

Manufacturer Smith and Nephew

Australian supplier –Smith and Nephew Australia

Ph: 13 13 60

Website www.smith-nephew.com/australia/healthcare

Available sizes

 

CODE

66800396

SIZE

5x5cm

ITEMS/Box

5

66800398 10x10cm 5
66800399 10x10cm 12
66800409 10x20cm 12
66800419 20x40cm 6
66800432 40x40cm 6
66800435 10x120cm 6
CODE

66800545

SIZE

2.5x60cm

ITEMS/Box

5

66800395 5x5cm 5
66800397 10×12.5cm 5
66800420 15x15cm 5
66800400 20x40cm 6
66800401 40x40cm 6

arcticmoisturecontorl

Allevyn Ag
Allevyn Ag Image

smith and nephewProduct type – antimicrobial foam dressing

Principle function All of the ALLEVYN Ag dressings combine the physical qualities of the ALLEVYN tri – layer construction with the antimicrobial activity of SSD. ALLEVYN Ag proven in vitro against a broad spectrum of bacteria including antibiotic resistant bacteria such as Pseudomonas, Methicillin-Resistant Staphylococcus Aureus (MRSA) and Vancomycin Resistant Enterococcus (VRE)

Recommended use ALLEVYN Ag dressings are indicated for use in a variety of wounds that are infected including superficial wounds through to deeper wounds as a secondary dressing.

Frequency of dressing change – ALLEVYN Ag range provides a sustained action with antimicrobial properties remaining effective for up to 7 days, depending on the level of exudate. The dressing can be gently lifted to inspect the wound underneath. The dressing should be changed once 75% saturated.

Precautions If patients have contraindications to silver dressings

Contraindications Dressing should not be used on individuals who are sensitive to or who have had an allergic reaction to silicone adhesive dressing or its components.

Manufacturer Smith and Nephew

Australian supplier –Smith and Nephew Australia

Ph: 13 13 60

Website: www.smith-nephew.com/australia/healthcare

Available sizes

CODE

 

66800460

SIZE & SHAPE

7.5×7.5cm

ITEMS/Box

 

10

66800461 10x10cm 10
66800462 12.5×12.5cm 10
66800463 17.5×17.5cm 10

allevynag

AQUACEL® Ag
AQUACEL® Ag Image

convatec_logo_rgb_secondary_blue_800_800

Product type – Antimicrobial Silver Hydrofibre

Principle function –AQUACEL® Ag antimicrobial silver dressing is a Hydrofiber® dressing with 1.2% ionic silver. The product turns to a gel when in contact with wound fluid.

Recommended use indicated for the treatment of any infected or risk of infection wound with a moderate to heavy level of exudate.  Ensure a 2.5cm overlap onto the surrounding skin of the wound. Cover with an appropriate secondary dressing.

Frequency odressing change –AQUACEL  ® Ag can be left on for up to 7 days, depending on the level of exudate. The dressing should be changed once 75% saturated.

Precautions If clinical signs of infection are present persist the patient should be reviewed by their medical professional.

Contraindications Dressing should not be used on individuals who are sensitive to or who have had an allergic reaction to the dressing or its components

Manufacturer – ConvaTec

Australian supplier –ConvaTec Australia

Website: www.convatec.com.au

Phone: 1800 335 276

 

Product Availability

Code Description Size Quantity
403771 Ribbon 2x45cm (.75″ x 18″) 5 per box
420128 Ribbon 1x45cm (.39″ x 18″) 5 per box
403706 Square 5x5cm (2″ x 2″) 10 per box
403708 Square 10x10cm (4″ x 4″) 10 per box
403710 Square 15x15cm (6″ x 6″) 5 per box
403711 Rectangle 20x30cm (8″ x 12″) 5 per box
403739 Surgical Size 4x10cm (1½” x 4″) 10 per box
403740 Surgical Size 4x20cm (1½” x 8″) 10 per box
403741 Surgical Size 4x30cm (1½” x 12″) 10 per box

 

AQUACEL® Ag Extra
AQUACEL® Ag Extra Image

convatec_logo_rgb_secondary_blue_800_800

 

Product type – Hydrofiber®  dressing with 1.2% ionic silver

Principle function – AQUACEL® Ag Extra™ dressing is composed of two layers of 1.2% ionic silver impregnated Hydrofiber® Technology stitched together with strengthening fibres. The product turns to a gel when in contact with wound fluid. AQUACEL® Ag Extra™ dressings kill a broad spectrum of wound pathogens in the dressing that can cause infection.

Recommended use– AQUACEL® Ag dressing is indicated as a primary dressing for moderately to heavily exuding wounds where there is an infection or an increased risk of infection.

Frequency odressing change – AQUACEL® Ag Extra™ can be left on for up to 7 days, depending on the level of exudate. The dressing should be changed once 75% saturated.

Precautions – Sterility is guaranteed unless pouch is damaged or opened prior to use. This device is for single-use only and should not be re-used. Re-use may lead to increased risk of infection or cross contamination.

Contraindications– Dressing should not be used on individuals who are sensitive to or who have had an allergic reaction to the dressing or its components

Manufacturer – ConvaTec

Australian Supplier: ConvaTec Australia

Ph: 1800 339 412

Website: www.convatec.com.au

Available sizes

CODE               SIZE                                                          Pcs

420675 5cm x 5cm – Square 5cm x 5cm 10 per box
420676 10cm x 10cm – Square 10cm x 10cm 10 per box
420678 15cm x 15cm – Square 15cm x 15cm 5 per box
420679 20cm x 30cm – Rectangle 20cm x 30cm 5 per box

download

   

AQUACEL® Ag Surgical Cover Dressing
AQUACEL® Ag Surgical Cover Dressing Image

convatec_logo_rgb_secondary_blue_800_800

Product type – Hydrofiber® surgical cover dressing with silver

Principle function – AQUACEL® Ag Surgical Cover Dressing is a postoperative dressing that is designed to provide a waterproof, bacterial and viral barrier which will conform to the body in postoperative surgical wounds.

Recommended use– AQUACEL® Ag Surgical Cover Dressing  is indicated for the treatment of post- operative surgical incisions.

Frequency odressing change – AQUACEL® Ag Surgical Cover Dressing can be left on for up to  7 days, depending on the level of exudate. The dressing  can be gently lifted to inspect the wound underneath. The dressing should be changed once 75% saturated.

Precautions – If clinical signs of infection are present, AQUACEL® Ag Surgical can be continued if appropriate infection treatment is commenced.

Contraindications– Dressing should not be used on individuals who are sensitive to or who have had an allergic reaction to the dressing or its components

Manufacturer – ConvaTec

Australian supplier –ConvaTec Australia

Website: www.convatec.com.au

Phone: 1800 335 276

Available sizes

Code Description Size Quantity
412009 For incisions up to 4cm 9cm x 10cm 10 per box
412010 For incisions up to 9cm 9cm x 15cm 10 per box
412011 For incisions up to 17cm 9cm x 25cm 10 per box
420670 For incisions up to 22cm 9cm x 30cm 10 per box
412012 For incisions up to 27cm 9cm x 35cm 10 per box

aquacelagsurgical

Atrauman® Ag
Atrauman® Ag Image

hartmann

Product type – wound Contact Layer with antibacterial properties.

Principle function – Silver-containing ointment dressings such as this have an antibacterial effect against gram-negative and gram-positive bacteria when in direct contact with the dressing.

Recommended use– For the treatment of superficial, acute and chronic wounds of any type; as well as for the complementary use in the treatment of locally infected wounds or wounds that show a high bacterial contamination.

Frequency of dressing change –Atrauman® Ag can be left on for 3-5 days, depending on the level of exudate.

Precautions – If highly exudating an absorbent dressing may be needed as a secondary dressing.

Contraindications– Dressing should not be used on individuals who are sensitive to or who have had an allergic reaction to silver ions.

Manufacturer – Hartmann

Australian supplier –Paul Hartmann Australia

Website:  www.hartmann.com.au

Ph: 1800 805 839

Available sizes –

 

ARTICLE NO        SIZE                        CONTENT
499571                      5x5cm                          10 pcs
499573                    10x10cm                       10 pcs
499575                     10x20cm                    10 pcs

atraumanag1 atraumanag2

Bactigras
Bactigras Image

smith and nephewProduct type –tulle gras dressing impregnated with soft paraffin and 0.5% chlorhexidine acetate

Principle function Bactigras* is an antiseptic, soft paraffin dressing which soothes and protects the wound whilst helping to reduce wound infection and inflammation. It has low adherence and allows the wound to drain freely into an absorbent secondary dressing.

Recommended use Bactigras is suitable for covering wounds such as minor burns, lacerations, abrasions, graft sites and leg ulcers.

Frequency of dressing change – Bactigras ™ can be left on for several days depending on the level of exudate of the wound.

Precautions Tulle gras dressings are not absorbent and therefore require a secondary dressing.

Contraindications  Bactigras should not be used on more than 10% of body area or in areas of dermatitis, contact sensitivity or photosensitivity may rarely occur. Anaphylactic reaction to chlorhexidine has been reported, but is rare and should not be used in known cases of sensitivity or allergy to chlorhexidine. Avoid contact with eyes, middle ear, meninges and brain. Do not use with oxidising wound cleaning agents, soap, other anionic materials, or potassium iodide. Seek medical advice immediately for all serious wounds and burns, or if redness or discomfort occurs

Manufacturer Smith and Nephew

Australian supplier –Smith and Nephew Australia

Ph: 13 13 60

Website: www.smithnephew.com/australia/healthcare

Available sizes

CODE SIZE Pcs/ shelf
7456 5x5cm 50
66003650 10x10cm 50
7457 10x10cm 10
7461 15x20cm 10
66003661 10x40cm 10
6007505 15cmx1m 1 roll
36102020 10x10cm (pk/3) 12

 

Image result for bactigrass

Biatain Ag Adhesive
Biatain Ag Adhesive Image

coloplastProduct type – Biatain® Ag Adhesive is a silver foam dressing.

Principle function – Biatain® Ag Adhesive is a soft, conformable silver foam dressing with a patented silver complex and a hydrocolloid adhesive border. Suitable for use on healthy skin and in areas with need for extra adhesion.

Recommended use Biatain® Ag Adhesive is ideal for moderately exuding wounds that need antimicrobial properties to prevent or decrease infection.

Frequency of dressing change – Biatain® Ag Adhesive can be left on for several days, depending on the level of exudate.

Precautions Any contraindications to silver ion use.

Contraindications Dressing should not be used on individuals who are sensitive to or who have had an allergicreaction to adhesive tapes.

Manufacturer – Coloplast

Australian supplier –Coloplast Australia

Ph: 9541  1111

Website: http://www.coloplast.com.au/Wound/WoundCare/

Available sizes

Product name Item number Local id Area size Units in package
Biatain®  Ag Adhesive 396310 7.5×7.5 cm 5
Biatain®  Ag Adhesive 396320 12.5×12.5cm 5

biatinadhesive

Biatain® Ag Non-Adhesive
Biatain® Ag Non-Adhesive Image

coloplastProduct type – Biatain® Ag Non-Adhesive is a silver foam dressing.

Principle function – Biatain® Ag Non-Adhesive is a soft, conformable non-adhesive silver foam dressing with a patented silver complex. Suitable for use on fragile skin.

Recommended use Proven to help infected wounds heal faster. The unique 3D foam structure for superior absorption, with patented silver complex with broad anti -microbial profile. This allows a continuous anti-microbial effect during entire wear time.

Frequency of dressing change – Biatain® Ag Non-Adhesive can be left on for several days, depending on the level of exudate.

Precautions if there are clinical adverse reasons to using silver ions therapy.

Contraindications Dressing should not be used on individuals who are sensitive to or who have had an allergic reaction to silver ions and silicone.

Manufacturer – Coloplast

Australian supplier –Coloplast Australia

Ph: 9541  1111

Website: http://www.coloplast.com.au/Wound/WoundCare/

Available sizes

Product name Item number Area size Units in package
Biatain®  Ag Non-Adhesive 351050 5×7 cm 5
Biatain®  Ag Non-Adhesive 396250 15×15 cm 5
Biatain®  Ag Non-Adhesive 396220 10×10 cm 5
Biatain®  Ag Non-Adhesive Cavity 396280 5×8 cm 5

biatinagnonadhesive

CarboFlex®
CarboFlex® Image

convatec_logo_rgb_secondary_blue_800_800

Product type – carbon dressing for moderate to heavily exuding malodorous wounds

Principle function – CarboFLEX® dressing is a five layer dressing specifically designed to manage problems associated with malodorous wounds.

Recommended use– CarboFlex® is indicated as a primary dressing for shallow wounds or as a secondary dressing over a wound filler for deeper wounds.

Frequency ofdressing change – CarboFlex® can be left on for several days, depending on the level of exudate. The dressing should be changed once 75% saturated.

Precautions If clinical signs of infection are present, CarboFLEX®  can be continued if appropriate infection treatment is commenced.

Contraindications Dressing should not be used on individuals who are sensitive to or who have had an allergic reaction to carbon in the dressing.

Manufacturer ConvaTec

Australian supplier –ConvaTec Australia

Website: www.convatec.com.au

Phone: 1800 335 276

Available sizes

Code RPBS

Code

Description Size Quantity
403202 4742N 10cm x 10cm 10cm x 10cm 10 per box
403203 8cm x 15cm (oval) 8cm x 15cm 5 per box
403204 4743P 15cm x 20cm 15cm x 20cm 5 per box

carboflex

Carbonet Dressings
Carbonet Dressings Image

smith and nephew

Product type – Carbonet* dressings have been designed in the treatment of malodorous and infected wounds.

Principle function Carbonet* dressings utilises the important, well-proven benefits of an activated charcoal layer, with the additional features of absorbency and low-adherency.

Recommended use for low exudating wounds that are odourous.

Frequency of dressing change – Carbonet* dressings can be left on for several days, depending on the level of exudate. The dressing can be gently lifted to inspect the wound underneath. The dressing should be changed once 75% saturated.

Precautions If clinical signs of infection are present, Carbonet* dressings should be used in conjunction with an antimicrobial .

Contraindications Dressing should not be used on individuals who are sensitive to or who have had an allergic reaction to carbon dressing or its components

Manufacturer Smith and Nephew

Australian supplier –Smith and Nephew Australia

Ph: 13 13 60

Website: http://www.smithnephew.com/australia/healthcare

Available sizes

CODE SIZE ITEMS/Box
7064 10x10cm 10
7065 10x20cm 10

carbonetdressings

Melgisorb® Ag
Melgisorb® Ag Image

molnlycke logo

Product type – antimicrobial alginate dressing.

Principle function – Melgisorb® Ag is an antimicrobial alginate dressing that absorbs exudate and promotes a moist wound environment. Melgisorb® Ag inactivates pathogens commonly found in wounds and provides sustained antimicrobial effects.

Recommended use – Melgisorb® Ag is indicated for the management of moderate to heavily exuding, partial-full thickness wounds. It may also be used in wounds with infection or at risk of infection under the medical supervision of a health care professional.

Frequency of dressing change – Melgisorb® Ag can be left on for up to 7 days, depending on the level of exudate. The product must be cut to the size of the wound. A secondary dressing is always required.

Precautions – May need absorbent dressing to manage exudate

Contraindications – any known sensitivity to silver based products

Manufacturer – Mölnlycke Health Care

Australian supplier – Mölnlycke Health Care

Ph: 1800 005 231

Website: www.molnlycke.com.au

Available sizes –

SIZE
5x5cm
10x10cm
15x15cm
3x44cm (Rope)

melgisorbag

Mepilex® Ag
Mepilex® Ag Image

molnlycke logo

Product type – antimicrobial absorbent foam dressing.

Principle function – Mepilex® Ag is an antimicrobial foam dressing that absorbs exudate and promotes a moist wound environment. It is conformable and minimises the risk of maceration by sealing the edges of the wounds, therefore preventing maceration. Mepilex® Ag inactivates pathogens commonly found in wounds within 30 minutes and can sustain this effect for up to 7 days.

Recommended use – Mepilex® Ag is indicated for the management of low to moderately exuding wounds such as leg and foot ulcers, partial-thickness burns and pressure ulcers. Mepilex Ag can be applied under compression bandaging and can be cut into different shapes and sizes.

Frequency of dressing change – Mepilex® Ag can be left on for several days, depending on the level of exudate. The dressing can be gently lifted to inspect the wound underneath. The dressing should be changed once 75% saturated or as clinically indicated.

Precautions/Contraindications – Any known sensitivity to silver. Do not use Mepilex Ag during radiation treatment or examinations (such as x-ray, ultrasound, diathermy or MRI). Do not use Mepilex Ag together with oxidising agents such as hydrogen peroxide or hypochlorite solutions.

Manufacturer – Mölnlycke Health Care

Australian supplier – Mölnlycke Health Care

Ph:  1800 005 231

Website:  www.molnlycke.com.au

Available sizes –               

CODE SIZE CONTENT (pcs)
287110 10cm x 10cm 5
287210 10cm x 20cm 5
287310 15cm x 15cm 5
287410 20cm x 20cm 2
287510 20 cm x 50cm 2

mepilexag

24 products«1 of 2»
Acticoat 7 Image
Acticoat 7
  Product type – antimicrobial silver dressing. Principle function – Acticoat*7 (with Nanocrystalline Silver) dressing is an effective antimicrobial barrie... Read More
Acticoat Absorbent with SILCRYST Image
Acticoat Absorbent with SILCRYST
Product type – A nanocrystalline silver dressing. Principle function – Acticoat*Absorbent with SILCRYST* nanocrystalsis an absorbent Type 1 alginate dressing incorporating nanocryst... Read More
Acticoat Flex Image
Acticoat Flex
Product type – Acticoat* Flex is an antimicrobial silver dressing. Principle function – Acticoat*Flex is an effective antimicrobial barrier dressing consisting of a single layer of k... Read More
Allevyn Ag Image
Allevyn Ag
Product type – antimicrobial foam dressing Principle function – All of the ALLEVYN Ag dressings combine the physical qualities of the ALLEVYN tri – layer construction with the anti... Read More
AQUACEL® Ag Image
AQUACEL® Ag
Product type – Antimicrobial Silver Hydrofibre Principle function –AQUACEL® Ag antimicrobial silver dressing is a Hydrofiber® dressing with 1.2% ionic silver. The product turns to a gel when in contact with wound flu... Read More
AQUACEL® Ag Extra Image
AQUACEL® Ag Extra
  Product type – Hydrofiber®  dressing with 1.2% ionic silver Principle function – AQUACEL® Ag Extra™ dressing is composed of two layers of 1.2% ionic silver impregnated Hydrofiber® Technology stitche... Read More
AQUACEL® Ag Surgical Cover Dressing Image
AQUACEL® Ag Surgical Cover Dressing
Product type – Hydrofiber® surgical cover dressing with silver Principle function – AQUACEL® Ag Surgical Cover Dressing is a postoperative dressing that is designed to provide a waterproof, bacterial and viral barrie... Read More
Atrauman® Ag Image
Atrauman® Ag
Product type – wound Contact Layer with antibacterial properties. Principle function – Silver-containing ointment dressings such as this have an antibacterial effect against gram-negative and gram-positive bacteria when in direct contact with the dressing. Recommended use– For the treatment of superficial, acute and chronic wounds of any type; as well as for the complementary use in the treatment of locally infected wounds or wounds that show a high bacterial contamination. Frequency of dressing change –Atrauman® Ag can be left on for 3-5 days, depending on the level of exudate. Precautions – If highly exudating an absorbent dressing ... Read More
Bactigras Image
Bactigras
Product type –tulle gras dressing impregnated with soft paraffin and 0.5% chlorhexidine acetate Principle function – Bactigras* is an antiseptic, soft paraffin dressing which ... Read More
Biatain Ag Adhesive Image
Biatain Ag Adhesive
Product type – Biatain® Ag Adhesive is a silver foam dressing. Principle function – Biatain® Ag Adhesive is a soft, conformable silver foam dressing with a patented silver complex and a hydrocolloid adhesive border. Suitable for use on healthy skin and in areas with need for extra adhesion. Recommended use– Biatain® Ag Adhesive is ideal for moderately exuding wounds that need antimicrobial properties to prevent or decrease infection. Freque... Read More
Biatain® Ag Non-Adhesive Image
Biatain® Ag Non-Adhesive
Product type – Biatain® Ag Non-Adhesive is a silver foam dressing. Principle function – Biatain® Ag Non-Adhesive is a soft, conformable non-adhesive silver foam dressing with a patented silver complex. Suitable for use on fragile skin. Recommended use– Proven to help infected wounds heal faster. The unique 3D foam structure for superior absorption, with patented silver complex with broad anti -microbial profile. This allows a continuous anti-microbial effect during entire wear time... Read More
CarboFlex® Image
CarboFlex®
Product type – carbon dressing for moderate to heavily exuding malodorous wounds Principle function – CarboFLEX® dressing is a five layer dressing specifically designed to manage problems associated with malodorous wo... Read More
Carbonet Dressings Image
Carbonet Dressings
Product type – Carbonet* dressings have been designed in the treatment of malodorous and infected wounds. Principle function – Carbonet* dressings utilises the importa... Read More
Melgisorb® Ag Image
Melgisorb® Ag
Product type – antimicrobial alginate dressing. Principle function – Melgisorb® Ag is an antimicrobial alginate dressing that absorbs exudate and promotes a moist wound environment. Melgisorb® Ag inactivates pathogens commonly found in wounds and provides sustained antimicrobial effects. Recommended use – Melgisorb® Ag is indicated for the management of moderate to heavily exuding, partial-full thickness wounds. It may also be used in wounds with infection or at risk of infection under the medical supervision of a health care professional. Frequency of dressing change – Melgisorb® Ag can be left on for up to 7 days, depending on the level ... Read More
Mepilex® Ag Image
Mepilex® Ag
Product type – antimicrobial absorbent foam dressing. Principle function – Mepilex® Ag is an antimicrobial foam dressing that absorbs exudate and promotes a moist wound environment. It is conformable and minimises the risk of maceration by sealing the edges of the wounds, therefore preventing maceration. Mepilex® Ag inactivates pathogens commonly found in wounds within 30 minutes and can sustain this effect for up to 7 days. Recommended use – Mepilex® Ag is indicated for the management of low to moderately exuding wounds such as leg and foot ulcers, partial-thickness burns and pressure ulcers. Mepilex Ag can be applied under compression bandaging and can be cut into... Read More